SOLVENT WITHOUT DANGER PICTOGRAMS
for DISSOLVING or CLEANING EPOXY RESINS,
before or after polymerisation
 |
 |
VOC 0 |
AREAS OF USE
Usage and application of all epoxy resins. Dissolving, as well as cleaning all manufacturing and application equipment.
Structural organic matrix composites.
Treatment of water valves in the petrochemical industry.
Electrical equipment, transformers, turbines and switches. Wind turbines. Home appliances. Electronic components. Bodywork primers. Tanks, vats. Skis, rackets, sailboards, glider components, golf clubs, fishing rods, musical instruments.
Floor coverings.
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
Appearance |
Visual |
Clear fluid |
- |
|
Colour |
Visual |
Amber |
- |
|
Odour |
Olfactory |
Light |
- |
|
Density at 25°C |
NF EN ISO 12185 |
1.090 |
kg/m3 |
|
Refractive index |
ISO 5661 |
1.4660 |
- |
|
Freezing point |
ISO 3016 |
7 |
°C |
|
Solubility in water |
- |
>40 |
% |
|
Kinematic viscosity at 40°C |
NF EN 3104 |
1.7 |
mm²/s |
|
Acid value |
EN 14104 |
<1 |
mg(KOH)/g |
|
Iodine value |
NF EN 14111 |
0 |
gI2/100g |
|
Residue after evaporation |
NF T 30-084 |
<0.1 |
% |
|
PERFORMANCE CHARACTERISTICS |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
KB index |
ASTM D 1133 |
>180 |
- |
|
Evaporation rate |
- |
>3 |
hours |
|
Surface tension at 20°C |
ISO 6295 |
27.7 |
Dynes/cm |
|
Copper blade corrosion 100h at 40°C |
ISO 2160 |
1b |
Rating |
|
FIRE SAFETY PROPERTIES |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
Flash point (vacuum) |
NF EN 22719 |
90 |
°C |
|
Self-ignition point |
ASTM E 659 |
>200 |
°C |
|
Lower explosive limit |
NF EN 1839 |
1.1 |
% (by volume) |
|
Upper explosive limit |
NF EN 1839 |
28.5 |
% (by volume) |
|
Content of explosive, oxidizing, flammable, highly or extremely flammable substances |
CLP Regulation |
0 |
% |
|
TOXICOLOGICAL PROPERTIES |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
CMR, irritating and corrosive substance content |
CLP Regulation |
0 |
% |
|
Residual methanol content from transesterification |
GC-MS |
0 |
% |
|
ENVIRONMENTAL PROPERTIES |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
Water endangering |
WGK Germany |
1 Not water endangering |
class |
|
Primary biodegradability CEC 21 days at 25°C |
L 33 T82 |
>80 |
% |
|
Readily biodegradable OECD 301 A over 28 days Disappearance of the COD |
ISO 7827 |
>80 |
% |
|
n-octanol water partition coefficient bioaccumulation |
OECD 107 |
-1.35 |
logKow |
|
Vapour pressure at 20°C |
- |
<0.1 |
hPa |
|
VOC (Volatile Organic Compounds) content |
- |
|
% |
|
Total halogen content (Chlorine Fluorine Bromine) |
Calorimetric bomb GC-MS |
0 |
% |
|
Benzene content |
LPCH |
0 |
% |
|
Aromatic solvent content |
LPCH |
0 |
% |
|
Environmentally hazardous substances content |
- |
0 |
% |
|
Content of compounds with a GWP |
- |
0 |
% |
|
Content of compounds with an ODP |
- |
0 |
% |
DIRECTIONS FOR USE
Use undiluted. Cleaning with cloths, by soaking, in cold or hot baths up to 70°C, in ultrasound baths, on basket machines in rotary or linear movement.
Product can be removed with water on substrates that are not sensitive to corrosion.
PRESENTATIONS
|
1000 KG IBC ontainer
|
200 KG Drum
|
Can 20 KG
|
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 